10A RC TX Controlled Relay Switch PWM Receiver

This is a NEW 10A RC TX Controlled Relay Switch PWM Receiver LED Control Spray Switch

Normal Mode:
The module can read a pulse width that can range from 400 to 2600us.
If the width of the pulse is more than 1800us, the MOSFET switch will close, if less than 1200us, the MOSFET switch will open.
Safe-protection Function:
This module has a safe-protection feature that reduces the likelihood of unexpected activation.
In the below 2 conditions the Safe-protection mode will active:
1. The pulse is more than 1800us at first power-up, the MOSFET switch open. The LED will blink, you should move the input to the off position, then normal more will active;
2. The signal is bad continuously for 500ms, the MOSFET switch open. The LED will blink. When the signal is good, the device will deactivate safe-protection mode.
LED:(Normal mode)
The LED will on when input pulse >1800us;
The LED will off when input pulse <1200us;
Safe-protection mode: the LED will fast blink.

Features:

A 10A RC TX (Radio Control Transmitter) Controlled Relay Switch with PWM Receiver is a specialized electronic device used in radio-controlled systems, typically in the field of hobbyist RC (Radio Control) applications. Here’s a description of this component:

1. Purpose: This device is designed to act as a switch, controlled remotely via a radio transmitter (RC TX). It is commonly used to control various electrical devices or components in an RC model or other projects requiring remote control.
2. Current Rating: The relay switch is capable of handling a maximum current of 10 amperes (10A). This means it can control devices or circuits with a current draw of up to 10A safely. This rating makes it suitable for various applications in RC models, such as turning on and off lights, motors, or other accessories.
3. RC Transmitter Compatibility: It is designed to be compatible with standard RC transmitters. Users can configure their RC transmitter to send specific signals (usually PWM – Pulse Width Modulation signals) to control the relay switch.
4. PWM Receiver: The device is equipped with a PWM receiver, which interprets the PWM signals sent by the RC transmitter. PWM signals encode information about the desired state of the relay switch, such as whether it should be turned on or off, and sometimes the degree of control (e.g., the speed of a motor).
5. Relay: A relay is an electromagnetic switch that can control high-current or high-voltage circuits using a low-power signal. In this case, the relay is used to open or close an electrical circuit based on the input received from the PWM receiver. It is often used to control devices like motors, lights, or other accessories.
6. Voltage Compatibility: The relay switch is designed to work within a specific voltage range, which should be suitable for the intended application. Users should ensure that the voltage matches the requirements of their devices.
7. Wiring Connections: The device will have input and output terminals or connectors to facilitate the connection of the controlled devices and the power source. Users typically need to connect the relay switch to the relevant components in their RC model or project.
8. Switching Speed: The relay switch’s response time, or switching speed, should be considered to ensure it meets the requirements of the application. In RC models, quick response times are often essential for precise control.
9. Safety Features: Some relay switches may include safety features such as overcurrent protection or voltage spike protection to safeguard the connected devices and prevent damage.
10. Mounting: The device may have mounting options or holes for secure attachment to the RC model or the project enclosure.

Overall, a 10A RC TX Controlled Relay Switch with PWM Receiver is a versatile component that allows hobbyists and enthusiasts to remotely control various electrical devices or circuits in their RC models or projects. It’s commonly used for turning devices on and off or modulating their operation, enhancing the control and functionality of RC vehicles, drones, and other radio-controlled systems.

This module is a nice little relay switch controlled by a spare auxiliary channel on your receiver. Ideal for switching lights, sound, and any other auxiliary electrical items
When PWM duty is more than 1500us, the switch will turn on; when PWM duty is less than 1400us, the switch will turn off

Package Includes :
1 x 10A RC TX Controlled Relay Switch PWM Receiver